Expert Tips for Installing a New Shower Unit

Request An Estimate

Do you find yourself trying to locate content concerning How to Build a Shower Enclosure for Your DIY Bathroom?

An effective shower setup requires careful preparation as well as a lot of work. For the most part, you will require to do 3 kinds of tasks: mounting wall surfaces, setting up the plumbing, and completing wall surfaces.

Prep work

Firstly, you should select the type of shower that you want to mount. It is necessary to ascertain whether the selected shower can dealing with particular systems and also can control a risk-free degree of water through the central heating boiler. Most shower devices nowadays are created to be versatile to different water stress (such as kept warm water and cold keys).
It is likewise important to take into account the water stress as well as the preparation of the piping and drain for the shower

Various Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be attached to the bathroom faucet based on your requirement, and also the water temperature can be changed through the taps. Push-on mixers are cheap and incredibly basic to set up. However, although the hose pipe link is basic, it is quickly removed. In addition, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose pipe as well as spray of this type of shower are integrated with a bathroom mixer tap, and the temperature level can be readjusted via the bath taps. It is a very low-cost option and also no extra plumbing is included. Nevertheless, the bath/shower mixers additionally suffer from troublesome temperature control choices.

Handbook Mixer: The pipe and also spray of a hand-operated mixer shower device belong of the wall system and also the cold and hot water materials are linked to a solitary valve The temperature level as well as pressure of the water are managed via either one or a selection of knobs (in much more expensive showers). Although temperature level control is much easier in manual mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for added plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose and also spray of this shower type belong of the wall surface unit as well as the cold and hot water supplies are linked to a solitary valve right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to stop it from ending up being as well warm. One of the greatest benefits of a thermostatic mixer shower type includes hassle-free temperature level control. However, it is the most costly of the various mixer alternatives.

Power Shower: A power shower is a single unit consisting of an effective electrical pump that can altering both the water pressure as well as temperature level. This sort of shower can be fitted if there is water supply from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the modification of both pressure and temperature very easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is provided by a combination boiler under keys stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it heats the water electrically. It is important to keep in mind that for this shower type to be set up, the mains pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature and also pressure to be changed using a knob. Designs with temperature level stabilisers are much better as they remain unaffected by various other faucets elsewhere being used within the family. A significant drawback of electric showers is that the control handle only allows for the choice of heats at much less stress, or reduced temperature levels at a greater pressure. This is troublesome in the winter when the spray is typically weak and also the keys water is colder. Nevertheless, this issue is taken on in some versions which are available with a winter/summer setting.

Approach

Depending upon the sort of shower you want to set up, the shower head should either be fitted in order to prevent its contact with the water in the bathroom listed below or the base tray, or it has to have a check valve.
Prior to beginning, it is advisable to note the settings of the shower head as well as control, and to prepare the pipe-work involved. In addition, the drain system to get rid of the waste water will certainly need to be planned. Both placements of the cable path and also the shower switch will certainly additionally need to be taken into consideration if a rapid or electric shower unit is being set up.
Make use of the instruction guide offered with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is important to cut off the supply of water. In order to safeguard the pipelines, they ought to be given a water-proof covering and additionally fitted with isolating valves. The pipelines can then be hidden into the wall surface and smudged over to neaten the overall appearance.
Fit the base tray, shower head, and installations.
Connect the major shower control to the pipes that will certainly be providing the water (This may call for a female screw thread adapter).
Reconnect the water and test the pipes for any type of leakages, as some might need tightening up.
If you are installing an electrical shower, keep in mind to turn off the electricity supply prior to making any kind of electrical links. When these connections have been made (there need to be advice within the user's manual), the power supply can be changed back on.

Adjusting Water Pressure to Match Your Shower

The cold water tank can be lifted to a better height (sometimes just 150mm (6inches)) by fitting a solid wooden assistance beneath it - potentially composed of struts as well as blockboards. If you choose this alternative, the primary as well as distribution pipelines will certainly likewise have to be elevated to fulfill the new height of the storage tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it should be attached right into the power supply in order to run.

Piping as well as Drainage

It is best to utilize 15mm size supply pipes, as well as make the runs to the shower as short and straight as possible so regarding keep optimal pressure and also minimise warmth loss. Furthermore, by reducing using joints for pipe edges, you can decrease the resistance in the flow of the water supply. You can accomplish this by flexing the pipelines instead.

A Lot Of Usual Errors

Violating or ignoring local code limitations.

Making use of pipelines that are also small.

Connecting copper to galvanized without using a brass or dielectric suitable between both.

Not using tape or pipeline compound at threaded joints.

Uneven your components when mounting them.

Not mounting an air space filling up for components.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the ended up wall surface remains in area.

Not properly aligning tubes right into fittings or quit valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leakage.).

When transforming the water back on in your home, always run the outside hose pipe shutoff or purge your bathrooms to hemorrhage dust and also air from the lines. This particles can trigger issues in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I came across that blog entry on How to Install a Direct-to-Stud Shower Enclosure while doing a search on the search engines. In case you liked our article please be sure to pass it around. Many thanks for your time spent reading it.

Book A Free Estimate